Carlton SP8018 TRX Especificações Página 27

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 101
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 26
SP8018 TRX SAFETY PRECAUTIONS
7
Be Safe and Practice Safe Operation using the following guidelines.
Any individual operating this machine must first read
and understand this manual, the engine manual and all
safety decals on machine.
DO NOT permit children to operate machinery or to
play near machinery during operation.
Always wear face shield and hearing protection during
operation. Loud noise and flying debris may cause
severe injury.
Keep hands, feet, legs, clothing, hair and all other body
parts away from cutter wheel and other moving
machine parts to eliminate the possibility of injury.
Shut down machine completely and remove key before
removing debris from work area (i.e. clearing rocks,
wood chips, etc.).
DO NOT modify or change any part without written
approval from J. P. Carlton Company.
Do not ride, sit, stand, lay or climb anywhere on this
machine during operation, while running, or during
transport.
Do not move, position, or transport this machine while
cutter wheel is engaged.
Do not refill fuel tank while engine is hot, running, or
indoors. Danger of fire or explosion exists.
Fuel and its vapors are highly flammable and explosive.
Handle with care. Only use approved (red) fuel
containers for storage.
Do not store fuel containers near any open flames,
sparks or other sources of ignition.
Do not store equipment with fuel in the tank.
Battery fumes are explosive. Recharge battery in an
open area away from fire, sparks, or other sources of
ignition.
Battery acid can cause severe burns. Keep away from
eyes, skin, and clothing.
Always remove battery before welding on equipment.
DO NOT OPERATE THE ENGINE AT AN
ANGLE GREATER THAN 25° OR SEVERE
ENGINE DAMAGE WILL OCCUR. PROPER
ENGINE OIL LEVEL MUST BE MAINTAINED TO
ACHIEVE MAXIMUM ANGLE OF OPERATION OF
25°. (See Engine Owner’s Manual for proper oil level.)
Vista de página 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 100 101

Comentários a estes Manuais

Sem comentários