Carlton 1712 Manual do Operador descarregar pdf (Página 35)

12” CHIPPER SAFETY PRECAUTIONS

9

• During operation of the chipper, all people

within a 100-foot radius should wear

protective equipment, including eye and

ear protection and hard hats.

• If unusual noise or vibration occurs, stop

engine immediately and correct the

problem before continuing operation,

consult authorized dealer if necessary.

• Keep all guards in place and properly

secured during operation. Never operate

the chipper with guards missing or loose.

• Keep all safety devices working properly

and all other machine parts in good

condition.

• Never leave the controls unattended while

in operation. Be sure machine is not

capable of operation when left unattended.

Remove key and disconnect battery, if

necessary.

• DO NOT OPERATE THE ENGINE AT

AN ANGLE GREATER THAN 25° OR

SEVERE ENGINE DAMAGE WILL

OCCUR. PROPER ENGINE OIL

LEVEL MUST BE MAINTAINED TO

ACHIEVE MAXIMUM ANGLE OF

OPERATION OF 25°. (See Engine

Owner’s Manual for proper oil level.)

• Gasoline, diesel fuel and their vapors

are highly flammable and explosive.

Handle with care. Only use approved

(red) fuel containers for storage.

• Do not store machine with fuel inside

tank or fuel containers near any open

flames, sparks, or other sources of

ignition.

• Do not store equipment with fuel in the

tank for long periods.

• Battery fumes are explosive. Recharge

b

attery in an open area away from fire,

sparks, or other sources of ignition.

• Use caution in extreme cold! Frozen

battery will explode! Allow battery to

thaw in heated area away from fire or

sparks.

• Battery acid can cause severe burns.

Keep away from eyes, skin, and

clothing.

• Remove battery before welding on

equipment.

• If operating chipper uncoupled from

tow vehicle, the tires and tongue must

be blocked. Use but do not depend on

jack stands to hold machine steady.

• Always store tools safely away from

moving machine parts, especially the

feed intake wheels.

• There should be no obstacles in the

path of operation behind the chipper or

around the chipper to allow trip free

movement of all personnel.

• Keep unauthorized persons away from

the chipper operation area.

• Do not operate chipper in dim lit, dark, or

concealed areas. Do not operate or run

machine or engine in enclosed area due to

carbon monoxide poisoning hazard.

• Keep machine clean and clear of debris to

eliminate fire hazard. It is especially

important to clean any oil or fuel spills to

prevent the danger of fire.

• Keep safety and instructional decals clean and

replace any that are damaged, difficult to read,

or missing. Decals may be purchased from J.

P. Carlton or an authorized dealer.

• Remove all foreign objects from the chipper

b

efore startin

g

, i.e.

j

ackets,

g

loves, tools, etc.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 164 165

Comentários a estes Manuais

Sem comentários