Carlton 1712 Manual do Operador descarregar pdf (Página 71)

12” CHIPPER MACHINE OPERATION

• The chipper infeed tray must be closed

and locked when towing. Make sure the

spring lock pins are in position and the

tray is secured. First the lock pins

behind the infeed chute frame will have

to removed and put back into their

storage position. Make sure there is no

other obstruction, such as limbs, bark, or

leaves, in between the infeed chute and

the tray.

• Secure the discharge chute. Rotate the

discharge chute back over the chipper

and lock the swivel releasing the lock

pin into one of the lock grooves. Make

sure the height adjustment is at the

lowest position so that the chute will not

be high enough to hit any overhead

obstructions and secure the handle. The

flap on the end of the discharge chute

needs to be lowered as far as possible so

that no debris comes out during travel.

Remove the wheel chocks before moving the chipper.

BOTH SIDES OF INFEED CHUTE

ROTATE CHUTE

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 164 165

Sem comentários

Carlton 1712 Manual do Operador Página 71