Carlton 2518 Manual do Operador descarregar pdf (Página 79)

18” DRUM MACHINE MAINTENANCE

52

JACK STAND – FRONT

• Check the lock pins to make sure they

are fitting properly and in good shape.

Replace any pins that are worn, bent or

damaged in any way. Make sure holes

for lock pins are not worn or stretched.

• Check general condition of the jack

stand. Make sure the holes are not worn

or elongated. Check the bottom of the

jack to make sure it will sit level on level

ground. Replace the jack stand if it is

warped, has unusual wear, or if it won’t

hold position when supporting the

chipper.

• Grease the jack stand as necessary. See

Lubrication section of manual.

JACK STAND – REAR

(OPTIONAL)

• Check the lock pins to make sure they

are fitting properly and in good shape.

Replace any pins that are worn, bent or

damaged in any way.

• Check general condition of the jack

stand. Make sure the holes are not worn

or elongated. Check the bottom of the

jack to make sure it will sit level on level

ground. Replace the jack stand if it is

warped, has unusual wear, or if it won’t

hold position when supporting the

chipper.

• Grease the jack stand as necessary.

TONGUE EXTENSION

(OPTIONAL)

• Check all bolts and nuts on the tongue

extension, if equipped. Replace any

bolts and nuts that have worn, chipped or

missing threads or that won’t stay

tightened.

• Check holes in the tongue extension

mounting plate and on the machine

tongue mounting plate. Make sure the

holes are round and not distorted. If

holes are distorted replace the mounting

plates as soon as possible.

GREASE

FITTING

CHECK PIN & HOLES

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 198 199

Comentários a estes Manuais

Sem comentários